Custom embedded charging · Furniture OEM / ODM
Develop a custom built-in charging point for your desk, table or hotel furniture range. ONEPOINTECH works with furniture OEMs, brands and project buyers on housings, mounting, branding and charging configurations, including Qi2 and up to 25W options.
Start with a sketch, dimensions or an application brief.
Need a standard charger? Shop built-in models ↗
Built-in · in-table · recessed
An embedded wireless charger fits into a prepared opening in a desk, table or countertop. The phone rests on the exposed charging face, while the power connection stays beneath the surface. Depending on the model, it may be described as built-in, in-table, recessed or flush-mounted.
For furniture manufacturers, fit-out contractors and hospitality buyers, the key is matching the charging unit to the opening, underside clearance, electrical supply and everyday use.
Need charging through an uncut surface? Explore Stealth under-table chargers →Office desks & meeting tables
Hotel nightstands & guest rooms
Café tables & shared spaces
Furniture ranges & OEM products
OEM design inspiration
Explore three starting points for your furniture range. Each concept can be reviewed against your installation, target devices and visual identity.
Concept 01 · Desks · nightstands · counters
A circular charging face integrated into the tabletop, with the body mounted below. Explore Qi2 magnetic alignment and a finish that fits your furniture range.
Design choices: Bezel finish · mounting depth · branding
Concept 02 · Hotel rooms · workstations
A charging face that supports the phone for hands-free viewing. Define a fixed or hinged mount with room for the connector, cable and thermal design.
Design choices: Viewing angle · hinge · cable route
Concept 03 · Meeting tables · shared spaces
Two charging positions within an integrated furniture module. Discuss station spacing, shared input power and optional USB-C connections for your installation.
Design choices: Station layout · USB-C · service access
Illustrative concepts, not installation drawings. Final dimensions, output and certification are agreed for your project.
Custom development
We can develop embedded charging solutions around your product and installation requirements. Start with an existing design or bring a brief for a custom housing, mounting arrangement or charging configuration.
Specify a finish, color, charging mark or branded face that fits your furniture range.
Discuss the mounting envelope, flange, fixing method and cable route around your existing design.
Choose the target charging experience, input connection and any additional wired charging requirements.
Define packaging, instructions, destination markets and the testing or certification scope for your project.
Qi2 & 25W OEM options
We can discuss OEM designs targeting Qi2 magnetic alignment and up to 25W wireless charging. Bring us your target phones, mounting envelope, input power and destination market.
We define the magnetic arrangement, thermal design and power supply around the complete installation. Output, phone compatibility and certification scope are agreed for each project.
Qi2 25W extends the magnetic Qi2 charging standard to higher output. Actual phone charging power depends on device support, the adapter and operating temperature.
Discuss a Qi2 / 25W project About Qi2 25W — Wireless Power Consortium ↗Start your OEM / ODM project
Share your application and approximate quantity to start the conversation. A finished drawing is optional. We’ll discuss the design direction, installation constraints and requirements for a quotation.
Have drawings or a project brief? Email info@onepointech.com.
Ready to buy a standard charger?
Use the shop for current product options and direct checkout.
Shop embedded wireless chargers ↗Installation planning
A neat fit starts with the complete assembly. Send a drawing or the dimensions of your furniture so we can review the charging unit, fixing method and power connection as one installation.
01
Share the cutout diameter, surface thickness and preferred mounting method. Keep room for the flange and fixing hardware.
02
Allow for the charger body, connector, cable bend and access for servicing. Check drawer and cabinet clearances.
03
Specify the available power supply and ventilation. Higher output needs a thermal design suited to the enclosure.
04
List the intended phones and cases, installation location, cleaning routine and any spill-resistance requirement.
From brief to rollout
01
Send the furniture dimensions, installation environment, target phones, quantity and launch date. Tell us whether you need a standard unit, branding changes or custom development.
02
Agree on the electrical and mechanical requirements, then test a sample in your intended surface. Check alignment, temperature, charging performance and service access.
03
Finalize the specification, packaging, testing requirements and commercial terms. MOQ and lead time are confirmed against the agreed configuration and order quantity.
Standard models · direct checkout
Have an installation that fits a standard model? Compare the mounting requirements and buy directly from our shop. For custom designs or bulk supply, contact us.
Up to 15W wireless · 60mm cutout
QC 3.0 adapter required for fast charging; sold separately.
View details & buy ↗
5W / 7.5W / 10W wireless · 60mm cutout · 2 USB-A ports
View details & buy ↗Before you specify
An embedded wireless charger is a charging unit installed into a cutout in a desk, table or countertop. Its charging face stays accessible at the surface, while the body and power cable sit below. It is also called a built-in, in-table or recessed wireless charger.
An embedded charger needs a cutout and provides a visible charging face. A Stealth under-table charger mounts beneath a non-metal surface and transfers power through the material. Choose embedded charging when you want an integrated charging point and can machine the surface; choose an under-table model when keeping the surface intact is a priority.
Yes. ONEPOINTECH can discuss custom embedded designs targeting Qi2 magnetic alignment and up to 25W wireless charging. Feasibility, output, thermal performance and certification depend on the final design. The concept drawings on this page are starting points for an OEM brief, not products available to order.
Use the drawing for the exact model and configuration you order. Check the cutout diameter, top flange, body depth, fixing mechanism, surface thickness and cable clearance together. Confirm the final installation drawing before machining production furniture.
No. Actual charging power depends on the phone, its supported charging protocol, the power adapter, alignment, case and temperature. For a Qi2 25W project, agree on the target phones and test the complete charger, adapter and enclosure together.
Yes. Our built-in wireless charger collection includes a 15W recessed charger and a pop-up desk charger with 5W / 7.5W / 10W wireless charging and two USB-A ports. Visit the linked product pages for pricing, available options and checkout. For bulk orders or a custom design, send an OEM inquiry.
Yes. Start with your application, approximate quantity and a sketch or dimensions if available. Tell us whether you prefer a flush insert, an angled dock or a modular charging layout. We can discuss the requirements before you finalize the furniture design.
Tell us your requirements for the housing, finish, branding, mounting arrangement, charging power, input connection, cable length and packaging. We review the requested combination against installation, thermal and electrical requirements, then define the configuration and quotation.
These depend on the selected model, degree of customization, order quantity and destination market. Send your expected quantity, target date and required standards with the inquiry so they can be addressed in the quotation. Any Qi or Qi2 certification claim must apply to the exact final product configuration.
Your next furniture range
Bring a sketch or tell us your application. Start with the design, mounting and charging experience you want to create.
