01 · Module
TD01-60W Charging Module
Compact customizable module for OEM integration
The standard TD01 is a compact 60W transmitter/receiver set with 21V DC / 3A output and a 15–35mm transmission range. Output voltage and current can be configured within the validated TD01 operating range after an engineering review. Custom PCB layouts, coil geometry, cables, connectors, firmware and communication interfaces are available as development projects; performance must be revalidated for the finished design.
Typical applications
Specifications
↓ Download datasheet (PDF)| Power input | DC 24V / 4A |
| Power output | 21V DC / 3A (60W) |
| Charging distance | 15–35mm (coil to coil) |
| Peak efficiency | 91% @ 25mm (DC-to-DC) |
| Alignment tolerance | ±10mm horizontal |
| Standby power | ≤ 0.5W |
| Transmitter PCBA | 90 × 90 × 18mm |
| Transmitter coil | 100 × 100 × 5.5mm |
| Receiver PCBA | 90 × 90 × 18mm |
| Receiver coil | 100 × 100 × 5.5mm |
| Protection | FOD, OCP, OVP, OTP |
| Certifications | — |
| Communication | UART / RS485 |
| Operating temperature | −20 to 55°C |
| Customization | Output configuration within validated range; custom PCB, coil, firmware and interfaces via development project |
Engineering resources
CAD files, 3D models and protocol documentation are available on request — tell us about your application.
Key features
- 21V / 3A output for compact battery-powered equipment
- Matched 60W transmitter and receiver module set
- Full protection suite built in (FOD / OCP / OVP / OTP)
- Custom output, PCB and coil projects available after feasibility review
Need a different spec?
Output voltage and current can be configured within range to match your battery. Hardware changes are possible as a development project — talk to us first.
